аналоговые фильтры в сетап )

добавить хочу :)

что-нить подобное:


</lj-embed>
и еще фраза в мануале понравилась:

"No menu structures with subsubsub...menus!"

)))

The modules of ebbe und flut:
-Input Amplifier (0db, +20db)
-Automatic Softknee Compressor
-Distortion
-Signalflow (internal routing)
-Bypass
-2 x VCF with each 12 filter functions
-VCA

-LFO:
-Sample & Hold (S&H)
-Voltage Follower
-2 x VC-(Voltage Controlled)-Envelope Generators (Attack/Hold/Release or Attack/Release)
-Audiotrigger
-Noisegate

External Ins and Outs:
-Main Input
-Main Output (VCA)
-VCF 1 Signal Input
-VCF 1 Signal Output
-VCF 2 Signal Input
-VCF 2 Signal Output
-Compressor Output
-Distortion Output

-Voltage Follower Output
-Audiotrigger Output
-LFO Wave Output
-LFO Speed CV-Input (<0.008Hz - 20 kHz, >21 octaves!)
-LFO Sync. Input
-S&H Trigger Input
-ENV 1 Trigger/ Gate Input
-ENV 1 Wave Output
-ENV 1 Attack Time (200 µs - many, many minutes)
-ENV 1 Hold Time (200 µs - many, many minutes)
-ENV 1 Release Time (200 µs - many, many minutes)
-ENV 1 Amount Input (bipolar Multiplication Input for continously pos./neg. Env-Output)
-ENV 1 Mode Input (either working as A-H-R with RE-Trigger-function or as A-R with Gate-function)
-ENV 2 Trigger/ Gate Input
-ENV 2 Wave Output
-ENV 2 Attack Time (200 µs - many, many minutes)
-ENV 2 Hold Time (200 µs - many, many minutes)
-ENV 2 Release Time (200 µs - many, many minutes)
-ENV 2 Amount Input (bipolar Multiplication Input for continously pos./neg. Env-Output)
-ENV 2 Mode Input (either working as A-H-R with RE-Trigger-function or as A-R with Gate-function)
-VCF 1 Cutoff CV-Input
-VCF 1 Resonance CV-Input
-VCF 2 Cutoff CV-Input
-VCF 2 Resonance CV-Input
-Pedal Input for independent cutoff modulation (pos./neg.) for each filter (volume pedal or active pedal with CV-output); switch for exchangable polarity of tip and ring for fitting with different brands

Максимально подробно..